May 09, 2024  
2021-22 BTC Catalog 
    
Catalog Navigation
  Catalog Home
  Message from the President
  About Our College
  Getting Started
  Student Life & Services
  Policies, Requirements & Records
  Programs of Study
  Course Descriptions
  Faculty and Employee Directory
  Student Conduct Code
  My Portfolio
HELP
2021-22 BTC Catalog [ARCHIVED CATALOG]

Course Descriptions

 

Health
  

  • HLTH 155 First Aid Fundamentals

    1 CR
    This eight-hour first aid course is in compliance with WAC 296-24 of the State of Washington and meets OSHA/WISHA requirements for first aid training. This course teaches the fundamentals of first aid in order to gain access to the EMS system, render emergency care in a low-risk occupational environment, and teaches adult CPR and obstructed airway techniques. Both CPR and first aid cards are good for two years. Attendance at all sessions and demonstration of competency is required for certification.
  

  • HO 127 Healthcare Provider CPR

    0.5 CR
    This basic life-support course is designed for healthcare providers and includes adult one- and two-rescuer CPR, pediatric one-rescuer CPR, and barrier devices. Successful written and mannequin skill evaluation and and attendance at all sessions is required to receive a card.
  

  • HT 100 Fundamentals of Medical Terminology

    5 CR
    The student will gain a basic knowledge of medical word building. The course will address root words, prefixes and suffixes and terms which are used in diagnostic, operative, and symptoms relating to the various systems of the body. Emphasis on correct spelling and pronunciation of selected common eponyms.
    Prerequisite(s): ACCUPLACER Classic Reading (71) or higher OR ACCUPLACER Next Gen Reading (247) or higher OR RDG 085 with a C or higher. ACCUPLACER Classic Sentence Skills (71) or higher OR ACCUPLACER Next Gen Writing (245) or higher OR ENGL 092 with a C or higher.
  

  • HT 103 Diseases of the Human Body

    5 CR
    Introduction to the effects of system diseases on the human body. Course includes discussions of selected diseases, including causes and treatments. Course also includes an overview of principles of pharmacology and description/purposes of selected laboratory tests.
    Prerequisite(s): HT 100 and HT 121, both with a C or higher.
  

  • HT 108 Medical Transcription I

    3 CR
    This course is designed to assist the student in developing the basic medical language, grammar, and formatting necessary for medical typing and transcription.
    Prerequisite(s): BIO 105  and typing 50 wpm.
  

  • HT 120 Introduction to Medical Insurance Billing

    5 CR
    This course focuses on insurance billing procedures; billing requirements in relation to insurance companies, clinics and hospitals; and insurance billing compliance standards and mandates. Students will learn skills that will enable them to create, process and correct insurance claims. Other subjects include billing office topics related to medical insurance, accounts receivable, and collection techniques.
    Prerequisite(s): HT 100, HT 103, HT 121 all with a C or higher. 
  

  • HT 121 Essentials of Anatomy & Physiology

    5 CR

    The student will develop a basic knowledge of the structure and function of the various body systems.  The course emphasizes the essential structure and function of the normal human body, which will serve as a foundation of general understanding for future study in health occupations.  Integration of each system to other systems and the whole organism as well as application of key concepts to health and disease are emphasized.
    Prerequisite(s): ACCUPLACER Classic Reading (71) or higher OR ACCUPLACER Next Gen Reading (247) or higher OR RDG 085 with a C or higher. ACCUPLACER Classic Sentence Skills (71) or higher OR ACCUPLACER Next Gen Writing (245) or higher OR ENGL 092 with a C or higher.

     
  

  • HT 122 Medical Office Procedures

    5 CR
    Medical Office Procedures is an introduction to healthcare administration. This course gives students transferable skills that will aid them in attaining employment within healthcare, as well as a global understanding of the differences within the various healthcare systems.  A strong emphasis will be placed on customer service skills when working in a diverse office team environment.  The student will learn the duties in the medical office, computerized medical office procedures as well as exercises in judgment, independent action, and coping with interruptions. In addition to computerized appointment scheduling and billing, students learn about the major insurances with ICD and CPT coding. This course is designed to give an overview of the various areas within healthcare administration that most healthcare professionals will be expected to understand and know when seeking a job.  Although healthcare operations may vary, a basic level of understanding in administration is vital for all healthcare professionals.
    Prerequisite(s): ACCUPLACER Classic Reading (71) or higher OR ACCUPLACER Next Gen Reading (247) or higher OR RDG 085 with a C or higher. ACCUPLACER Classic Sentence Skills (71) or higher OR ACCUPLACER Next Gen Writing (245) or higher OR ENGL 092 with a C or higher.
  

  • HT 130 Medical Office Procedures

    5 CR
    Prepares the student for the role of an office or administrative assistant and the broader role as a professional member of the management team. Class exposes the student to the growing influence of information technology, the expanding global marketplace, and the changes in the organizational structure of modern business.
  

  • HT 131 Introduction to Medical Coding

    5 CR
    This course introduces students to medical coding in an outpatient clinical setting. The course focuses on a comprehensive overview of current CPT, ICD and HCPCS code sets and provides an introduction to new industry changes with ICD codes.  This course also includes an introduction to coding compliance and industry guidelines for clinical application.
    Prerequisite(s): HT 100, HT 103, HT 120, HT 121, HT 122 all with a C or higher.
  

  • HT 132 Medical Records Management

    5 CR
    This course instructs students in the application of medical records management. Medical records management includes, but is not limited to: electronic medical records, health care policy & procedure records, patient documentation & forms, Washington state and federal record retention timelines and appropriate clinical documentation improvement strategies. This course also includes an overview of compliance, guidelines and medical record auditing in a clinical practice.
    Prerequisite(s): HT 100, HT 103, HT 120, HT 121, HT 122 all with a C or higher.
  

  • HT 135 Pharmacology for the Medical Office

    3 CR
    This course will introduce students to the various forms of medications, drug classifications, administration routes and how they work. Students will also learn the terminology associated with each, for those medications commonly prescribed in the medical office setting.
    Prerequisite(s): HT 100 and HT 121, both with a C or higher. 
  

  • HT 145 Health Care Records Systems

    5 CR
    Functions of medical record departments and record systems will be addressed. Hands on process of hospital records, uses, content, and evaluation.
  

  • HT 225 Nutrition & Health for Healthcare Professionals

    4 CR
    Through this course, students will gain applicable knowledge of nutrition and health as it relates to patient services.  Students will demonstrate and apply concepts of day-to-day healthy living and stress management techniques which improve patient services, human resource management and aid in the prevention of health care professional burn out.  This course also includes an overview of reimbursement practices for nutrition and health improvement strategies in a clinical setting. 
    Prerequisite(s): HT 100, HT 103, HT 121 all with a C or higher.
  

  • HT 230 Medical Diagnostic Coding ICD

    5 CR
    Learn to assign codes in medical/health records to ensure accurate and complete reimbursement documentation. The focus will be on ICD-10 codes with some discussion of CPT codes.
    Prerequisite(s):  HT 100, HT 103, and HT 121 all with a C or higher. 
  

  • HT 240 Medical Procedure Coding - CPT & HCPCS

    5 CR
    Course trains students to assign physician’s Current Procedural Terminology (CPT) and Healthcare Common Procedure Coding System (HCPCS) codes in medical/health records to ensure accurate and complete reimbursement documentation.
    Prerequisite(s): HT 100, HT 103, and HT 121 all with a C or higher.
  

  • HT 250 Advanced Medical Coding

    5 CR
    Advanced Medical Coding is a continuation of the procedures and practices of ICD-9 and CPT coding and helps prepare the student for certification testing.
    Prerequisite(s): HT 230  and HT 240 .
  

  • HT 260 Health Care Records Internship

    3 CR
    With the help of their advisor, students will arrange work experience in a medical records office. May be a paid or an unpaid work experience.
    Prerequisite(s): All previous coursework.
  

  • HT 265 Medical Billing & Coding Practicum

    8 CR
    Students use the information learned in medical insurance billing and coding to demonstrate proficiency in coding procedures. Students, using simulated patient records and various insurance forms, will analyze patient account statements and records. Medical documentation guidelines, ethics and laws as they pertain to patient information will also be addressed.
    Prerequisite(s): HT 120, HT 230, and HT 240 all with a C or higher.
  

  • HT 270 Excel for the Medical Office

    3 CR
    This course will teach the basics of MS Excel as it relates to functions commonly used in the medical office. Students will learn efficient use of a spreadsheet in order to create records pertinent to the medical office, such as patient and insurance information, operational and capital budgets, tracking quality indicators and productivity by person, and tracking delinquent and incomplete records by type. Text required.
    Prerequisite(s): CAP 103 or CAP 105  with a C or higher.
  

  • HT 275 Medical Ethics & Law

    5 CR
    Medical Ethics and Law is a student centered course that is designed to help students understand the relevance of current ethical and legal trends in the health care industry. This course prepares students not only for healthcare ethics on a national level, but also an international level that relates to working with today’s diverse population. Through this course, students will gain an understanding of the challenges providers and healthcare workers face when treating patients who may be culturally diverse, have varying religious beliefs, or different in lifestyle choices, and the various psycho-social aspects of each as it relates to healthcare.  Students will also attain an understanding of the complex legal issues medical providers face and how changing state and federal laws directly impact health care business operations.
    Prerequisite(s): HT 120 and HT 122, both with a C or higher.

Heating, Ventilation, Air Conditioning and Refrigeration
  

  • HVACR 101 Fundamentals of Refrigeration

    8 CR
    This course presents safety in the workplace, the fundamentals of vapor compression refrigeration, HVAC/R tools, equipment and refrigerants. Students will build a working refrigeration system in the lab portion of this course. Instructors will have the students pressure test, evacuate, and charge their systems with industry standard equipment.
    Prerequisite(s): ACCUPLACER Arithmetic score of 38 or MATH 090 with a C or higher or ABE 050 with a C or higher; and ACCUPLACER Reading Comprehension score of 71 or RDG 085 with a C or higher; and ACCUPLACER Sentence Skills score of 71 or ENGL 092 with a C or higher; or Instructor permission.
    Completion Of or Concurrent Enrollment In: HVACR 102 with a C- or higher or concurrent enrollment in HVACR 102, or Instructor permission.
  

  • HVACR 102 Basic Electricity for HVACR

    8 CR
    This course presents the fundamentals of electrical theory, controls, motors, and applications. Emphasis is placed on proper diagnostic and troubleshooting procedures. Lectures and assigned readings are supplemented by the student’s individual work on projects in the lab on an electrical circuitry trainer. Proper electrical safety and codes are observed in the coursework.
    Prerequisite(s): ACCUPLACER Arithmetic score of 38 or MATH 090 with a C or higher or ABE 050 with a C or higher; and ACCUPLACER Reading Comprehension score of 71 or RDG 085 with a C or higher; and ACCUPLACER Sentence Skills score of 71 or ENGL 092 with a C or higher; or Instructor permission.
    Completion Of or Concurrent Enrollment In: HVACR 101 with a C- or higher or concurrent enrollment in HVACR 101, or Instructor permission.
  

  • HVACR 121 Commercial Self-Contained Systems

    7 CR
    This course analyzes medium and low temperature refrigeration systems and components used in commercial applications. Emphasis is placed on safe trouble-shooting techniques on live equipment as installed in industry.
    Prerequisite(s): HVACR 101  and HVACR 102 , both with a C- or higher, or Instructor permission.
    Completion Of or Concurrent Enrollment In: HVACR 122 .
  

  • HVACR 122 Commercial Ice Systems

    7 CR
    This course introduces the various types and makes of commercial ice production systems used in restaurants, institutions, and process applications. Wiring diagrams and sequence of operations are emphasized. Proper installation, maintenance, cleaning, sanitizing and troubleshooting techniques are emphasized. The student will verify proper production, learn how to build a wiring schematic, identify faults inserted by instructor and repair the inserted faults. Students must test for EPA section 608 certification and pass with a minimum of Type 2 certification in order to pass this course.
    Prerequisite(s): HVACR 101  with a C- or higher and HVACR 102  with a C- or higher, or Instructor permission.
    Completion Of or Concurrent Enrollment In: HVACR 121 .
  

  • HVACR 131 Furnace Technology

    7 CR
    This course introduces gas piping, venting and control systems for several different types of furnaces in residential and commercial applications. Emphasis is placed on electrical safety, BTU calculations, and airflow calculations, cost analysis, wiring diagrams, and troubleshooting techniques.  Classroom discussion and hands on lab activities are designed to enable students to quickly identify system problems and propose solutions.
    Prerequisite(s): HVACR 121  and HVACR 122 , both with a C- or higher, or Instructor permission.
    Completion Of or Concurrent Enrollment In: HVACR 132 .
  

  • HVACR 132 Boilers and Hydronic Heat

    7 CR
    This course explores the use of boilers and hydronics to heat residential and commercial buildings. Students will apply proper tools and techniques to identify components, design, install, maintain and troubleshoot problems in hydronic heating systems. Systems used in the lab will use natural gas, propane, or fuel oil for residential and commercial boilers.
    Prerequisite(s): HVACR 121  and HVACR 122 , both with a C- or higher, or Instructor permission.
    Completion Of or Concurrent Enrollment In: HVACR 131 .
  

  • HVACR 201 A/C & Airflow

    8 CR
    This course prepares the student to install, start-up, troubleshoot and diagnose problems in comfort cooling air conditioning systems. Emphasis is given to wiring techniques, proper refrigeration piping, controls, start-up and maintenance.
    Prerequisite(s): HVACR 131  and HVACR 132 , both with a C- or higher, or Instructor permission.
    Completion Of or Concurrent Enrollment In: HVACR 202  with a C- or higher or concurrent enrollment in HVACR 202, or Instructor permission.
  

  • HVACR 202 Applied Heat Pump Systems

    5 CR
    This course prepares the student to install, start-up, troubleshoot and diagnose problems in residential and commercial heat pump systems. Emphasis is given to wiring techniques, proper refrigeration piping, controls, start-up and maintenance. Integration of auxiliary heat components, balance point identification, cost analysis to other fuels, and geothermal systems are all introduced and applied in the lab. Students must pass the Light Commercial Air Conditioning and Heating Industry Competency Exam (ICE) in order to pass this course.
    Prerequisite(s): HVACR 131  and HVACR 132 , both with a C- or higher, or Instructor permission.
    Completion Of or Concurrent Enrollment In: HVACR 201  with a C- or higher or concurrent enrollment in HVACR 201, or Instructor permission.
  

  • HVACR 221 Commercial Refrigeration

    8 CR
    This course expands on commercial refrigeration systems presented in HVACR 121 and HVACR 122. Five different commercial systems will be utilized in the lab area in conjunction with the lecture portion of this course. Each ancillary component is analyzed for compatibility, proper selection, operation, need, energy savings and equipment reliability.  Wiring diagrams are emphasized and diagnosis of failed components is also addressed. How the system operates as a whole is critical and students are encouraged to research new and innovative applications for these systems.
    Prerequisite(s): HVACR 201  and HVACR 202 , both with a C- or higher, or Instructor permission.
    Completion Of or Concurrent Enrollment In: HVACR 222 .
  

  • HVACR 222 Industrial Refrigeration

    7 CR
    This course will provide an in depth study of industrial applications of chilled water-cooling systems. Classroom activities are supplemented by students individual and group work on five lab projects including screw compressors and a cooling tower. Analyzing various systems for cost benefits, installation, service and proper annual maintenance procedures are emphasized. Transcritical and ammonia systems and all the related safety implications are included in this course. Students must pass the Commercial Refrigeration Industry Competency Exam (ICE) in order to pass this course.
    Prerequisite(s): HVACR 201  and HVACR 202 , both with a C- or higher, or Instructor permission.
    Completion Of or Concurrent Enrollment In: HVACR 221  with a C- or higher or concurrent enrollment in HVACR 221, or Instructor permission.
  

  • HVACR 231 Control Theory for HVAC/R

    8 CR
    This course presents basic control theory for energy management and control systems. Systems covered in-depth include electric, electronic, distributed digital control, pneumatic, VAV and VVT.
    Prerequisite(s): HVACR 221  and HVACR 222 , both with a C- or higher, or Instructor permission.
    Completion Of or Concurrent Enrollment In: HVACR 232  with a C- or higher or concurrent enrollment in HVACR 232, or Instructor permission.
  

  • HVACR 232 Commercial & Industrial Boilers

    2 CR
    This course presents commercial and industrial boilers and combustion controls, advanced flame safeguards, safety, code compliance and efficiency testing of gas and oil fired systems. Classroom activities are supplemented by the student’s individual and group work on mocked-up and actual operating systems.
    Prerequisite(s): HVACR 221  and HVACR 222 , both with a C- or higher, or Instructor permission.
    Completion Of or Concurrent Enrollment In: HVACR 231  with a C- or higher or concurrent enrollment in HVACR 231, or Instructor permission.
  

  • HVACR 233 Employment Preparation

    1 CR
    This course prepares students with the necessary skills to research companies in the HVAC/R industry, successfully create a professional resume and cover letter, and practice articulating their HVAC/R skills and experience in mock interviews.
    Prerequisite(s): HVACR 221  and HVACR 222 , both with a C- or higher, or Instructor permission.

History
  

  • HIST& 146 United States History I

    5 CR
    Survey of Native American societies, European explorers, and the lifestyles of the new continent, the independence movement, and the problems of a new nation.
  

  • HIST& 147 United States History II

    5 CR
    Survey course covering the rise of nationalism, evolution of American lifestyles, Civil War, westward movement, and the American industrial revolution.
  

  • HIST& 148 United States History III

    5 CR
    Survey course exploring the social, political, and economic history of the United States from 1900 to the present.

Humanities
  

  • HUM& 101 Introduction to Humanities

    5 CR
    Students explore the works in the literary, performing, and visual arts. Students identify common themes in the arts, analyze works representing diverse perspectives, and investigate the political, social, technological and historical contexts of works. A broader understanding is encouraged through the exploration and synthesis of outside sources using research methods.
    Prerequisite(s): Accuplacer Reading Comprehension score of 71 or RDG 085  with a C or higher, and Accuplacer Sentence Skills score of 71 or ENGL 092  with a C or higher.

Industrial Maintenance and Mechatronics
  

  • EMTEC 105 Trade Safety

    3 CR
    The topics will be on health and safety core rules, material safety data sheets, fall protection, confined spaces, Lock out/Tag out requirements, ladder, scaffolding and portable power tools as well as navigating the Washington State Labor and Industries website. Utilizing dynamic lecture and discussion, and hands-on practice, students develop knowledge and skills for careers in industry.
    Prerequisite(s): ACCUPLACER Algebra score of 75 or MATH 098  with a C or higher; ACCUPLACER Reading Comprehension score of 71 or RDG 085  with a C or higher; and ACCUPLACER Sentence Skills score of 71 or ENGL 092  with a C or higher.
  

  • EMTEC 110 DC Circuits

    6 CR
    The purpose of this course is to give students a firm foundation in electrical theory. The course covers DC circuit theory with an emphasis on circuit analysis, practical application, and troubleshooting. The course requires an understanding of simple mathematics.
    Completion Of or Concurrent Enrollment In: EMTEC 105 with a C- or higher OR concurrent enrollment in EMTEC 105.

     
  

  • EMTEC 121 Fundamentals of Hydraulic & Pneumatics

    5 CR
    This is the first course in a series designed to prepare the industrial millwright, electrician and maintenance technician with the knowledge and skills necessary to maintain, diagnose, and repair hydraulic and pneumatic systems. Instructional material is online with selected modules emphasizing hydraulic pumps, safety, compressed air basics and types of gauges.
    Prerequisite(s): EMTEC 105 with a C- or higher. 
  

  • EMTEC 123 Hydraulics & Pneumatics Circuits

    5 CR
    This course covers principles and operating characteristics of hydraulic and pneumatic systems, and components. Utilizing state-of-the-art computer interactive software, dynamic lecture and discussion, and hands-on practice, students develop knowledge and skills for the fluid power industry. Text and basic tools required.
    Prerequisite(s): EMTEC 121  with a C- or higher.
  

  • EMTEC 125 Applied Mechanics

    5 CR
    This course introduces the student to fundamental mechanical concepts necessary for the installation, operation, and maintenance of industrial machinery.
    Completion Of or Concurrent Enrollment In: EMTEC 105 with a C- or higher OR concurrent enrollment in EMTEC 105.
  

  • EMTEC 126 Engineering Graphics

    4 CR

    The student will discover print reading format and dimension with types and symbols. A study of thread specifications and building drawings will be presented. Utilizing state-of-the-art computer interactive software, dynamic lecture and discussion, and hands-on practice, students develop knowledge and skills for careers in industry. Text and basic tools required.
    Completion Of or Concurrent Enrollment In: EMTEC 105 with a C- or higher OR concurrent enrollment in EMTEC 105.

     
  

  • EMTEC 131 Rigging

    4 CR
    The student will study and apply industry standard principals to safely plan and facilitate controlled lifting of equipment. Utilizing state-of-the-art computer interactive software, dynamic lecture and discussion, and hands-on practice, students develop knowledge and skills for careers in industry. Text and basic tools required.
    Prerequisite(s): EMTEC 125 with a C- or higher.
  

  • EMTEC 133 Introduction to Machinery Skills

    4 CR
    Studies introduce shop safety and guidelines, the use of measuring tools, basic shop equipment and a study of vertical milling machines and lathes. Supervised hands on project will be produced by the student. Utilizing dynamic lecture and discussion, and hands-on practice, students develop knowledge and skills for careers in industry. Text and basic tools required.
    Prerequisite(s): EMTEC 105 with a C- or higher 
  

  • EMTEC 180 Manufacturing Computer Applications

    4 CR

    In this course Students are introduced to Microsoft applications such as Access, PowerPoint, Word, and Excel. Students will learn how to use these programs in an industrial setting.
    Prerequisite(s): EMTEC 126 with a C- or higher.

     
  

  • EMTEC 205 Programmable Logic Controllers

    5 CR
    This course is an introductory study of Programmable Logic Controllers, including configuring hardware and software, general construction and operation as well as programming.
    Prerequisite(s): EMTEC 211  with a C- or higher.
  

  • EMTEC 210 AC Circuits

    6 CR
    The AC Circuits class builds on the concepts that are covered in EMTEC 110 . The course covers AC circuit theory with an emphasis on circuit analysis, practical application, and troubleshooting. The course requires an understanding of simple mathematics.
    Prerequisite(s): EMTEC 110 with a C- or higher. 
  

  • EMTEC 211 Electrical Controls I

    5 CR
    This course introduces the student to the components used in today’s control systems. Control schematics are introduced with hands-on use of various multi meters in troubleshooting relay logic circuits. Utilizing state-of-the-art computer interactive software, dynamic lecture and discussion, and hands-on practice, students develop knowledge and skills for careers in industry. Text and basic tools required.
    Prerequisite(s): EMTEC 210  with a C- or higher.
  

  • EMTEC 215 Programmable Logic Controllers II

    5 CR
    In this course, students build on the foundation set in EMTEC 205 . This course addresses advanced PLC topics including math and logic functions.
    Prerequisite(s): EMTEC 205  with a C- or higher. 
  

  • EMTEC 217 Instrumentation & Controls

    4 CR
    This course introduces the student to sensor indicators and transmitters. Measurement, gages, flow sensors and other industrial sensing devices will be studied in this class. Utilizing state-of-the-art computer interactive software, dynamic lecture and discussion, and hands-on practice, students develop knowledge and skills for careers in industry. Text and basic tools required.
    Prerequisite(s): EMTEC 205 with a C- or higher. 
  

  • EMTEC 218 Introduction to National Electrical Code

    2 CR
    The student is introduced to some of the common industrial applications of the National Electrical Codes such as grounding, bonding, wire sizing, conduit selection, junction box selection, motor overload protection and current protection selection. Utilizing state-of-the-art computer interactive software, dynamic lecture and discussion, and hands-on practice, students develop knowledge and skills for careers in industry. Text and basic tools required.
    Prerequisite(s): EMTEC 225 with a C- or higher. 
  

  • EMTEC 220 Micro-Controllers

    5 CR
    This course focuses on the application of microprocessors in industry, with emphasis on understanding basic operation, interfacing, and programming. Study includes basic architecture, memory structure, programming language, interfacing with peripheral devices, input/output devices, and diagnostics.
    Prerequisite(s): EMTEC 225 with a C- or higher.  
  

  • EMTEC 225 Solid State Components

    4 CR
    This course builds on EMTEC 110  and EMTEC 210 , introducing the student to circuits involving diodes, transistors, SCRs, and other solid state devices.
    Prerequisite(s): EMTEC 210   with a C- or higher
  

  • EMTEC 230 Problem Solving for Manufacturing & the Trades

    3 CR
    This class addresses technical problem-solving skills including reading and interpreting technical documents and instructions
    Prerequisite(s): EMTEC 180 with a C- or higher.
  

  • EMTEC 231 Bearings & Drives

    5 CR
    The student will learn the application and theory of bearing technology with emphasis on storing, installing, and maintenance. The course will include an examination of different drive types with emphasis on theory, maintenance and repair. Utilizing state-of-the-art computer interactive software, dynamic lecture and discussion, and hands-on practice, students develop knowledge and skills for careers in industry. Text and basic tools required.
    Prerequisite(s): EMTEC 125 with a C- or higher.
  

  • EMTEC 232 Drive Alignment-Conveyors & Machining Systems

    4 CR
    Principals and devices used for joining and aligning shafts are presented in this course. Conveying equipment and other automatic transfer machinery will be discussed. Troubleshooting and repair of drives and conveyors will be covered. Utilizing state-of-the-art computer interactive software, dynamic lecture and discussion, and hands-on practice, students develop knowledge and skills for careers in industry. Text and basic tools required.
    Prerequisite(s): EMTEC 231   with a C- or higher.
  

  • EMTEC 234 Valves, Pumps & Traps

    5 CR
    The student will examine the principles of pumps, valves, and steam traps. Students will apply mechanical skills in the rebuilding of basic pump types along with diagnosing problems. Utilizing state-of-the-art computer interactive software, dynamic lecture and discussion, and hands-on practice, students develop knowledge and skills for careers in industry. Text and basic tools required.
    Prerequisite(s): EMTEC 125   with a C- or higher.
  

  • EMTEC 237 Computerized Maintenance & Management Systems

    3 CR
    In this course, the student will examine the components and functions of a CMMS. Work orders, scheduling, spares and stores controls, equipment histories, back logs, asset management practices will be covered. Utilizing state-of-the-art computer interactive software, dynamic lecture and discussion, and hands-on practice, students develop knowledge and skills for careers in industry. Text and basic tools required.
    Prerequisite(s): EMTEC 180 with a C- or higher.
  

  • EMTEC 260 Automated Manufacturing Systems

    4 CR
    The purpose of this course is to provide an overview of robotics and automation technology. Students will explore the basic principles of manipulator, actuator, and control systems. The course requires an understanding of simple mathematics and the basic use of computers. The laboratory will be used to perform real-time exercises in programming applications and techniques through the use of various training robots and systems.
    Prerequisite(s): EMTEC 210  and EMTEC 220 both with a C- or higher. 

Instrumentation & Control
  

  • INST 100 Direct Current 1

    4 CR
    A thorough introduction for the new student to the fundamental properties and applications of electricity. This course opens the doors to a wide array of career opportunities in computer servicing, biomedical equipment servicing, manufacturing technology, telecommunications, and home entertainment equipment servicing. In addition, safety procedures are emphasized. Students learn how to make good solder connections and recognize and repair bad solder connections. Students learn how to select and clean soldering tools. This course continues with the basics of current, voltage and resistance. The application of Ohm’s Law and the construction of circuits to verify electronic theory provide the knowledge necessary to build the foundation for a thorough understanding of electronics. This course teaches the student to use a logical course of correction to an electronic problem in a minimum amount of time. Student will learn generic troubleshooting technique procedures and tricks of the trade from analog to digital circuits.
    Prerequisite(s): BTC College Level Math score of 75 or MATH 090  with a C or higher; ACCUPLACER Reading Comprehension score of 71 or RDG 085  with a C or higher; and ACCUPLACER Sentence Skills score of 71 or ENGL 092  with a C or higher; completion of Intermediate Algebra (MATH 099 ) or placement into Pre-Calculus ( MATH & 141 ).
  

  • INST 106 Direct Current II

    4 CR
    The development of a working knowledge of the basic principles of DC electronics. The purpose and operation of such devices as resistors, capacitors, inductors and meters are covered in labs and theory.
    Completion Of or Concurrent Enrollment In: INST 100 , INST 110  and INST 115 , all with a C- or higher; or concurrent enrollment in INST 100 , INST 110  and INST 115 ; or Instructor permission.
  

  • INST 110 Alternating Current I

    4 CR
    An introduction and examination of the principles and applications of alternating current, including frequency, reactance, impedance, and resonance.
    Completion Of or Concurrent Enrollment In: INST 100 , INST 106  and INST 115 , all with a C- or higher; or concurrent enrollment in INST 100 , INST 106  and INST 115 ; or Instructor permission.
  

  • INST 115 Alternating Current II

    4 CR
    Students continue their exploration of AC with transformers and filter circuits (low-pass, high-pass, band-stop and band-pass), with theory, lab work, and projects.
    Completion Of or Concurrent Enrollment In: INST 100 , INST 106  and INST 110 , all with a C- or higher; or concurrent enrollment in INST 100 , INST 106  and INST 110 ; or Instructor permission.
  

  • INST 120 Semiconductors I

    5 CR
    Students learn how discrete semiconductor devices are constructed, how to handle them, how diodes, bipolar transistors, FETS, and thrystors operate and how to use them in practical circuits. ACDC power supply circuits introduced as well.
    Prerequisite(s): INST 115 .
  

  • INST 125 Semiconductors II

    5 CR
    This course introduces the student to various “building block” circuits including amplifiers, oscillators, and power supply circuits, through theory, lab work, and projects.
    Prerequisite(s): INST 120 .
  

  • INST 130 Op-Amps I

    3 CR
    Explores the design and operation of basic operational amplifier circuits through theory and lab work to illustrate and confirm the design and operation of linear amplifiers, voltage and current converters, comparators and precision rectifiers.
    Prerequisite(s): INST 125 .
  

  • INST 135 Op-Amps II

    3 CR
    Oscillators, active filters and single power-supply circuits and other applications of op-amps are covered in theory, practical labs and projects.
    Prerequisite(s): INST 130 .
  

  • INST 140 Digital I

    5 CR
    A comprehensive focus on the concepts, terminology, components and circuits that combine to form basic digital systems with lab work and projects.
    Prerequisite(s): INST 135 .
  

  • INST 141 Motor Controls

    4 CR
    In this course you will learn how to wire, configure, and use electromechanical relays to control electric motors and other discrete (on/off) control elements for real processes. You will also learn how to wire, configure, and use variable-frequency motor controls to use three-phase AC motors as final control elements.
    Prerequisite(s): INST 140  with a C- or higher.
  

  • INST 142 PLC Programming

    4 CR
    In this course you will learn how to wire, program, and configure programmable logic controllers (PLCs) to perform discrete control functions including combinational logic, counters, and timers.
    Prerequisite(s): INST 141  with a C- or higher.
  

  • INST 143 PLC Systems

    4 CR
    In this course you will learn how to program data-handling functions in programmable logic controllers (PLCs) including comparison, arithmetic, and data transfer instructions. You will also learn to connect and program human-machine interface (HMI) panels to PLCs.
    Prerequisite(s): INST 142  with a C- or higher.
  

  • INST 145 Digital II

    5 CR
    Flip-flops, Sequential Logic, Combination Logic, Semiconductor Memory, Data Conversion and Digital Troubleshooting theory and practical labs help the student understand digital circuits and techniques.
    Prerequisite(s): INST 140 .
  

  • INST 150 Electronic Communications

    6 CR
    This course provides a comprehensive introduction to electronic communication fundamentals and applications including modulation, transmitters, receivers, antennas, RF, digital communication, multiplexing, cellular and PCS.
    Prerequisite(s): INST 145 .
  

  • INST 200 Introduction to Instrumentation

    2 CR
    This course introduces you to the trade, terminology, and basic principles of instrumentation. It is a preparatory course for any one of three sections within the second year of Instrumentation: measurement, control, and systems, enabling you to begin your second year of Instrumentation at the start of Fall, Winter, or Spring quarter.
    Prerequisite(s): MATH& 141   with a C or higher, or Instructor permission.
  

  • INST 205 Job Preparation I

    1 CR
    Preparation for employment including resume preparation, cover letter writing, job search engine use, and interviewing skills.
    Prerequisite(s): INST 200  and MATH& 141  with a C or higher.
  

  • INST 206 Job Preparation II

    1 CR
    This course teaches you how to get the jobs that are not listed in classified ads or job search engines. You will learn how to professionally network, research employers for job potential, conduct informational interviews, and otherwise take an active approach in securing employment within your professional field.
    Prerequisite(s): INST 205  and MATH& 141  with a C or higher.
  

  • INST 233 Protective Relays

    4 CR
    In this course you will learn how to commission, test, and analyze basic protective relays and instrument transformers used to protect equipment in electrical power systems. This course also reviews phasor mathematics for three-phase electrical circuits.
    Prerequisite(s): MATH& 141  with a C or higher and INST 141  with a C- or higher.
  

  • INST 240 Pressure and Level Measurement

    6 CR
    In this course you will learn how to precisely measure both fluid pressure and fluid/solids level in a variety of applications, as well as accurately calibrate and efficiently troubleshoot pressure and level measurement systems.
    Prerequisite(s): MATH& 141   with a C or higher and completion of or concurrent enrollment in INST 200 .
  

  • INST 241 Temperature & Flow Measurement

    6 CR
    In this course you will learn how to precisely measure both temperature and fluid flow in a variety of applications, as well as accurately calibrate and efficiently troubleshoot temperature and flow measurement systems.
    Prerequisite(s): MATH& 141   with a C or higher and completion of or concurrent enrollment in INST 240 .
  

  • INST 242 Analytical Measurement

    5 CR
    This course teaches the basic principles of process analysis including pH, electrical conductivity, turbidity, and chemical constituency.
    Prerequisite(s): MATH& 141   with a C or higher, and completion of or concurrent enrollment in INST 241 .
  

  • INST 250 Final Control Elements

    5 CR
    In this course you will learn how to precisely control energy in process systems using fluid valves and motors. You will also learn how fluid power systems work, and how to efficiently troubleshoot final control elements.
    Prerequisite(s): MATH& 141   with a C grade, and completion of or concurrent enrollment in INST 200 .
  

  • INST 251 PID Control

    5 CR
    This course teaches you how the most basic and widely-used control algorithm works: proportional-integral-derivative (PID). In this course you will see how the PID algorithm is implemented in pneumatic, analog electronic, and digital control systems.
    Prerequisite(s): MATH& 141   with a C or higher, and completion of or concurrent enrollment in INST 250 .
  

  • INST 252 Loop Tuning

    4 CR
    This course teaches the art and science of tuning PID controllers for robust loop control, including Ziegler-Nichols closed-loop and open-loop methods in addition to heuristic methods.
    Prerequisite(s): MATH& 141   with a C or higher, and completion of or concurrent enrollment in INST 251 .
  

  • INST 260 Data Acquisition Systems

    4 CR
    This course reviews digital theory learned in the first year (Core Electronics) courses, building upon that foundation to explore industrial data busses (including Ethernet) and indicating, datalogging, and SCADA systems.
    Prerequisite(s): MATH& 141   with a C or higher, and completion of or concurrent enrollment in INST 200 .
  

  • INST 262 Digital Control Systems

    5 CR
    This course teaches the basic principles of distributed instrumentation, including distributed control systems (DCS), FOUNDATION Fieldbus instruments, and wireless field instruments.
    Prerequisite(s): MATH& 141   with a C or higher, and completion of or concurrent enrollment in INST 260 .
  

  • INST 263 Control Strategies

    5 CR
    This course teaches the theory and practical application of process control strategies including cascade, feed forward, selector, and override controls. Safety instrumented systems (SIS) concepts are also covered in this course.
    Prerequisite(s): MATH& 141   with a C or higher, and completion of or concurrent enrollment in INST 262 .
  

  • INST 290 Internship

    5 CR
    An internship exists to give students the opportunity to learn instrumentation in a real-world setting. In this course, you will work under the direction of a supervisor at a real job site, performing work directly related to instrumentation and control. Specific objectives will vary with the job and with the supervision.
    Prerequisite(s): MATH& 141   with a C or higher, and completion of or concurrent enrollment in INST 200 .
  

  • INST 292 Internship

    10 CR
    An internship exists to give students the opportunity to learn instrumentation in a real-world setting. In this course, you will work under the direction of a supervisor at a real job site, performing work directly related to instrumentation and control. Specific objectives will vary with the job and with the supervision.
    Prerequisite(s): MATH& 141   with a C or higher, and completion of or concurrent enrollment in INST 200 .

Job Skills
  

  • CTE 108 Job Skills

    1 CR
    This course provides students with the foundation for job preparation and job searching. Students will identify their qualifications for their chosen career; identify what employers look for in strong candidates; build resumes and cover letters; gain tips on completing applications; job and informational interviewing; as well as job searching, professional networking, and tips for setting up a successful career. This is a hybrid course that includes a combination of face-to-face and online instruction. It is important that students should have skills in Microsoft Word before enrolling in this course.
    Prerequisite(s): Students should have skills in Microsoft Office before enrolling in this course.
  

  • CTE 109 Job Skills II

    1 CR
    This course teaches the students how to find employment that are not listed in classified advertisements or job search engines. Students will apply for positions in their field of interest, and provide feedback from their experiences.

Legal
  

  • LGL 225 Field-Based Experience

    5-7 CR
    Students will arrange to work in a college-approved professional setting where they will apply business and legal administrative support skills and knowledge in a variety of related activities.
    Prerequisite(s): Instructor permission.
  

  • LGL 226 Field-Based Experience

    6 CR
    Students will work in a legal office-related job receiving pay or volunteering.
    Prerequisite(s): Instructor permission.

Machining
  

  • MACH 101 Machine Shop Fundamentals I

    3 CR
    This course provides the student with the foundation for success in machining, covering general shop safety, the use of precision measuring tools and blueprint reading. Students will learn proper and safe use of shop equipment and space. In addition, students learn to use precision measuring tools such as micrometers, height gages, calipers, gage blocks, gage pins, and indicators. Students will read and interpret measurements and choose the appropriate measuring tool for the required degree of accuracy. Blueprint reading will be a point of emphasis, covering terms, dimensioning, title blocks, views, and more.
    Prerequisite(s): ACCUPLACER Arithmetic score of 38 or MATH 090 or ABE 050 with a C or higher; ACCUPLACER Reading Comprehension score of 71 or RDG 085 with a C or higher; and ACCUPLACER Sentence Skills score of 71 or ENGL 092 with a C or higher.
  

  • MACH 102 Machine Shop Fundamentals II

    3 CR
    Continuing on the trajectory set by MACH 101, students will expand their skills of measuring.  The introduction of measuring over the wire, thread micrometer, pitch gage, and bore various bore gages will be introduced.  Students will use indirect measuring and continue to develop skills gained in MACH 101.  Shop math will be a point of emphasis, converting fractions, geometry, and trigonometry.  These skills will be put to use as the student expands on their blueprint reading skills.  The student will solve for unknown dimensions, and increase their overall knowledge of blueprints, to include feature call-outs, complex views, thread specifications, and more complex information.
    Prerequisite(s): MACH 101  with a C or higher.
  

  • MACH 103 Machine Shop Fundamentals III

    3 CR
    The third course in the Machine Shop Fundamentals series, this covers the principles of heat treating and precision grinding. The students will be exposed to the concepts of Geometric Dimensions and Tolerancing through blueprints. Students will measure and calculate dimensions of precision ground parts to verify they are to print.
    Prerequisite(s): MACH 102  with a C or higher.
  

  • MACH 141 Introduction to Manual Lathe

    5 CR
    An introductory course emphasizing the proper set up and use of conventional engine lathes. Students will learn to identify the essential parts of an engine lathe and their functions. This will include gear setting to achieve desired speeds and feeds on a variety of different lathes. Work holding and the use of the 3-jaw chuck will be covered. Lathe operations to be introduced will be facing, O.D. turning, grooving, parting-off and drilling. Students will create their own cutting tools by grinding correct geometry on HSS tool blanks.
    Completion Of or Concurrent Enrollment In: MACH 101  and MACH 151 , both with a C or higher; or concurrent enrollment in MACH 101  and MACH 151 ; or Instructor permission.
  

  • MACH 142 Advanced Manual Lathe

    5 CR
    A continuation of the skills achieved in MACH 141 . Students learn more advanced lathe operations including turning a taper, single point threading, knurling, and boring. All skills will be demonstrated by completing class projects to specified dimensions and tolerances.
    Prerequisite(s): MACH 141  with a C or higher.
  

  • MACH 151 Introduction to Manual Mill

    5 CR
    In this introductory course, students will learn the name and uses of the various parts of a vertical knee mill. The proper use of a mill will be covered including speed and feed adjustment, work holding and the 3-axis coordinate system. Operations to be performed will be tramming in a table, squaring a vise, tool setting, edge finding, facing, end mill use, drilling, and tapping. All skills will be used to produce class projects to print specifications.
    Completion Of or Concurrent Enrollment In: MACH 101  and MACH 141 , both with a C or higher; or concurrent enrollment in MACH 101  and MACH 141 ; or Instructor permission.
 

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8